Contact Us

Category: Artificial Intelligence

  • Securing the AI Boom in the Americas

    Securing the AI Boom in the Americas

    The data center market in the Americas is no longer just growing. The AI boom is surging at a pace that is fundamentally altering the global digital landscape. According to recent industry analysis from Business Facilities, the Americas have solidified their lead as global data center capacity explodes. This lead is largely driven by the unrelenting demand for Artificial Intelligence (AI) and high-performance computing (HPC).

    As of 2025, the U.S. remains the epicenter of this expansion. Northern Virginia, the world’s largest data center market, saw under-construction capacity jump by 80% in the first half of 2025 alone (CBRE). However, this rapid growth brings two critical challenges that threaten to stall the AI revolution. Unprecedented energy demand and the silent degradation of cooling infrastructure.

    At Coat Zone, we believe that the key to sustaining the AI boom isn’t just about building more. It’s about protecting and optimizing what we already have.

    The Energy Paradox: AI’s Massive Cooling Appetite

    Data centers are among the most energy-intensive facilities on Earth. In 2024, data centers consumed approximately 183 terawatt-hours (TWh) in the U.S. alone—roughly 4% of the country’s total electricity (Pew Research). By 2030, this demand is projected to grow by 133% to 426 TWh.

    The “energy hog” in the room is cooling.

    • The Cooling Tax: Cooling systems are the second-largest energy consumer in a data center. They account for 30% to 50% of total energy use in less-efficient enterprise facilities (IEA/Coat Zone).
    • The AI Multiplier: AI-focused servers generate significantly more heat than traditional servers, requiring 2 to 4 times the power and, consequently, a massive increase in cooling capacity to prevent catastrophic hardware failure.

    When cooling efficiency drops even by a small percentage, the Power Usage Effectiveness (PUE) of a data center skyrockets. This drop leads to millions of dollars in wasted operational expenditure (OpEx).

    The Corrosion Threat: A Silent Saboteur of Uptime

    While power grids struggle to keep up with demand, environmental factors are attacking the very machines designed to provide relief. Corrosion is a primary cause of HVAC failure, responsible for nearly 40% of equipment failures in industrial settings (CED Engineering).

    In data center hubs—ranging from the humid corridors of the East Coast to industrial zones in the Midwest—cooling coils are under constant attack from:

    • Salt Air & Humidity: Accelerating the oxidation of aluminum and copper.
    • Pollutants & “Electrolytes”: Gaseous contaminants that cause pitting and “formicary” corrosion, which can lead to refrigerant leaks and total system failure in less than a year.
    • Thermal Stress: Constant 24/7 operation at high loads accelerates the mechanical degradation of the bond between HVAC fins and tubes, reducing heat transfer by 15–20% over just five years (IRE Journals).

    Re-Engineering Resilience for the AI Boom

    To meet the goals of the “Americas-first” data center expansion, facilities must shift from a “replace-on-failure” mindset to a “protect-and-optimize” strategy. Coat Zone’s dual-coating approach provides a high-impact, low-cost shield for the infrastructure powering the AI boom:

    1. CoilSafe® & CoilSafe Plus® (Internal Protection): These ultra-thin (8–10 micron) inorganic coatings bond covalently to HVAC coils. Unlike traditional thick coatings, they do not impede heat exchange. By preventing corrosion and “fouling” (the buildup of dirt and microbes), CoilSafe can improve HVAC efficiency by up to 10% and maintain near-factory performance for the life of the unit.
    2. ThermalBlock™ (External Defense): Applied to exterior cabinets and rooftop ductwork, ThermalBlock acts as a radiant barrier that blocks up to 93% of solar heat. By keeping the unit’s cabinet temperature within 10°F of ambient air, it drastically reduces the “thermal load,” allowing the system to run less frequently and consuming significantly less kWh during peak demand.

    Sustaining the AI Boom with ROI

    As Business Facilities highlights, the Americas are leading the charge in capacity, but that leadership requires a foundation of efficiency. Integrating Coat Zone’s coatings can:

    • Reduce cooling energy consumption by 15–30%.
    • Extend the useful life of assets by 50% or more, deferring massive capital expenditures.
    • Deliver a rapid ROI, typically within 12 to 36 months.

    The future of AI is being built today. By protecting the cooling infrastructure that keeps these digital brains alive, Coat Zone is helping ensure that the surge in capacity is matched by a surge in resilience.

    Sources:

  • Securing Data Centers for the AI Revolution in the Gulf States

    Securing Data Centers for the AI Revolution in the Gulf States

    In the infrastructure sector, the vision for the future is clear: massive digital expansion powered by AI. The Gulf States are at the epicenter of this transformation. They are projected to add over 200 new data centers by 2030. This represents a total commitment expected to exceed $20 billion USD in digital infrastructure.

    Yet, the entire success of this digital leap rests on a critical, often-overlooked foundation: the HVAC systems. In an environment defined by extreme heat and coastal salinity, protecting the cooling infrastructure is not just an operational necessity. It is the ultimate determinant of a data center’s profitability, resilience, and capacity to handle the next generation of computing.

    The Unseen Burden on Data Centers

    The sheer scale of regional expansion means cooling demand is expected to triple by 2030, skyrocketing the required HVAC capacity to between 1.2–1.4 GW. In a data center, cooling is the single largest energy consumer, typically accounting for 30–50% of the total energy use.

    This large cooling requirement generates an immediate financial and environmental burden:

    • Massive Capital Investment: The forecasted regional investment in HVAC systems for these new facilities is an estimated $3.5–4 billion USD between 2025 and 2030.
    • Grid Strain and Opex: Running these systems will require an estimated 7–10 TWh annually by 2030. In a region often reliant on fossil-heavy grids, this power consumption could generate an additional 5–7 million metric tons of CO₂ annually.

    Failing to implement a proactive strategy means accepting high operating costs, short equipment lifecycles, and significant carbon liability. The intense heat of the Gulf States, combined with corrosive conditions, causes conventional equipment to break down more quickly, forcing operators into costly, recurring replacement cycles.

    The Solution: Re-Engineering Efficiency with Coat Zone Coatings

    The challenge is not simply about finding a new cooling unit. It’s about re-engineering the existing assets to perform at peak efficiency under the world’s harshest conditions. Coat Zone offers advanced HVAC coatings designed to solve the core problems of corrosion, thermal degradation, and lost efficiency.

    1. Internal Coil Protection: Restoring Core Performance

    CoilSafe® is our thin-film, inorganic coating made for the heart of your cooling system: the heat exchanger coils. Unlike traditional coatings that are thick and impede heat exchange, CoilSafe® is ultra-thin at just 8–10 microns, roughly 40 times thinner than standard coatings.

    This precision engineering allows it to form a permanent, covalent bond with the coil metal. CoilSafe® also restores the critical bond between the fin shoulder and copper tubing that loosens with age. The result is measurable, immediate performance recovery, with systems often showing an improvement of up to 10% in HVAC efficiency. CoilSafe® is also antimicrobial, resisting the mold, mildew, and bacteria that compound inefficiency and impact air quality.

    2. External Thermal Defense: Blocking the Heat

    In the soaring temperatures of the Gulf States, solar heat gain on exterior cabinet surfaces forces units to run longer and harder.

    ThermalBlock™ is a high-performance thermal radiant barrier applied to the exterior cabinets, exposed ductwork, and rooftops. It reflects solar radiation before it can heat the equipment, a passive defense that is immediately effective. ThermalBlock™ is proven to block up to 93% of solar heat. This reduces surface temperatures to within 10°F of ambient air temperature. Keeping the cabinet cooler reduces HVAC run-time, leading to lower energy consumption and less wear on the system components.

    The AI Imperative: High-Efficiency as a Foundation

    The future of data centers is synonymous with AI. These high-density, compute-intensive operations create unprecedented thermal loads. Power Usage Effectiveness (PUE) is the gold standard for efficiency. The immense power consumption of AI and Machine Learning (ML) hardware directly threatens PUE targets.

    The efficiency gains delivered by Coat Zone’s coatings are foundational to supporting a future of AI-driven computing:

    • Enabling Density: Operators can safely increase rack density and support the cooling needs of cutting-edge AI hardware by ensuring HVAC coils operate at peak efficiency and cabinet temperatures are minimized.
    • Optimizing PUE: The adoption of advanced coating solutions can lower the energy consumption and related carbon emissions from HVAC in new data centers by 20–30%. This directly translates to lower PUE and superior performance reporting for shareholders and regulatory bodies.

    This isn’t just about protection; it’s about an integrated, science-backed strategy that allows your digital infrastructure to support the massive computational demands of the AI era.

    Schedule Your Consultation

    The time to secure your digital future is now. Delaying protection in extreme environments means sacrificing efficiency, inviting corrosion, and accepting unnecessary capital replacement costs. To ensure your investment in new or existing data centers is future-proof and ready for the demands of AI, you must move beyond conventional strategies.

    Coat Zone and its approved dealers offer a clear path to securing your cooling infrastructure, drastically reducing operational expenditure, and aligning your digital growth in the Gulf States with sustainability goals.

    To learn more about how CoilSafe® and ThermalBlock™ can deliver rapid ROI for your next project, schedule a consultation with our team today.

    Don’t just build a data center. Build a resilient one that powers the future of AI.

  • Beyond the Grid

    Beyond the Grid

    Why Data Center Location Is the Ultimate High-Stakes Decision

    The modern world runs on data, and data runs on data centers. These digital factories are the most important industrial real estate of our time. When a company decides where to plant one of these multi-million, sometimes multi-billion, dollar facilities, it is one of the most consequential decisions they will ever make.

    A data center’s location is not a simple choice. The choice is a high-stakes calculation that balances risk, cost, and access to essential resources. As Artificial Intelligence (AI) and cloud computing explode, the demands placed on these facilities are higher than ever, pushing site selectors into challenging geographic areas.

    For builders and operators, understanding the core factors driving these location choices is critical—and so is preparing the HVAC infrastructure to survive the inevitable environmental trade-offs.

    The Unholy Trinity: Three Non-Negotiable Data Center Location Selection Factors

    The process of choosing a data center site is a game of compromise. There are three core factors that are non-negotiable for success [1, 2].

    1. Power: The Unquenchable Thirst 

    The most important factor is the availability of reliable, affordable, and sustainable power. Data centers, particularly those supporting AI and high-performance computing, are massive consumers of electricity. A typical cloud data center can consume the power of tens of thousands of homes.

    • Why it’s essential: Without a stable, redundant connection to an affordable grid, the center cannot operate profitably or reliably. The demand for low-carbon energy also pushes operators toward regions with abundant renewable resources like hydro, wind, or solar power [5].

    2. Connectivity: The Fiber Lifeline 

    A data center is useless if it’s not connected to the internet’s global nervous system. Site selectors prioritize proximity to major fiber optic routes and internet exchange points to ensure low latency (the speed at which data travels).

    • Why it’s essential: For applications ranging from financial trading to streaming, a delay of milliseconds can mean failure. High-quality, redundant, and diverse fiber access ensures the data center can serve its customers efficiently and remain operational if a single line is cut [2, 4].

    3. Risk and Resilience: Battling Mother Nature 

    Power and connectivity draw data centers to densely populated or resource-rich areas. However, the need for resilience pushes them away from high-risk zones. Locations prone to natural disasters, such as earthquakes, hurricanes, or floods, are often avoided [3].

    • Why it’s essential: Downtime is catastrophic. A strong location strategy requires mitigating physical risk, including avoiding sites near flight paths, chemical plants, or known fault lines [4].

    The Unavoidable Trade-Off: Data Center Location Risk

    In the pursuit of low-cost power and fiber access, data centers are often forced to choose locations with unavoidable environmental challenges. A prime example is the trend of building in coastal regions (for transatlantic fiber) or near hydro-power dams (for cheap energy).

    These strategic choices expose critical HVAC systems to major threats that undermine efficiency and reliability:

    1. High Humidity and Condensation: Coastal locations or those with aggressive cooling strategies (like using large amounts of evaporated water) result in high ambient humidity. This promotes condensation on cold surfaces like cooling coils, ductwork, and air handling unit casings. This moisture is the breeding ground for mold and corrosion [3].
    2. Airborne Contaminants: Locations near industrial centers or coastlines introduce corrosive elements (like salt spray or industrial pollutants) into the cooling air stream. These contaminants attack unprotected metal surfaces, leading to micro-organism growth, fouling, and ultimately, system failure.

    The data center faces premature equipment failure, reduced thermal transfer efficiency (leading to higher energy bills), and a compromised indoor environment if the negative factors aren’t addressed.

    Coating the Core: Mitigating Location Risk with Coat Zone

    Coat Zone’s specialized protective coatings are engineered to directly counter the environmental damage from strategic location choices. They help ensure the HVAC infrastructure lives as long as the digital infrastructure it serves.

    CoilSafe and CoilSafe Plus: Protecting the Heart of Cooling

    The most vulnerable component in any data center is the cooling coil because it is constantly exposed to the air.

    • How they help: CoilSafe and CoilSafe Plus create a durable, ultra-thin barrier that is antimicrobial and highly resistant to environmental corrosion. In coastal or industrial environments salt and pollutants accelerate coil degradation. Our coatings prevent fouling and microbial growth (mold and bacteria) that would otherwise compromise both air quality and thermal transfer. CoilSafe and CoilSafe Plus maintain peak thermal efficiency to directly support continuous, affordable cooling.

    ThermalBlock: Stopping Condensation and Corruption

    Applied to the exterior of air handling units, chilled water piping, or plenum surfaces, ThermalBlock addresses the solar heat load challenge head-on.

    • How it helps: ThermalBlock acts as a superior thermal barrier, blocking up to 93% of solar heat, instantly reducing surface temperatures to within 10°F of the surrounding air, even in peak summer conditions.

    The decision on where to place a data center can be driven by fiber and power. But, the resilience of that investment is determined by the protective measures taken against the chosen location’s environment. Coat Zone ensures that the essential cooling systems, the very lungs of the data center, are protected and optimized, no matter where they are built.

    Sources:

    1. Does it Matter Where My Data Center is Located? DataCenters.com. https://www.datacenters.com/news/does-it-matter-where-my-data-center-is-located
    2. How Important Is Location When Choosing a Data Center? Data Center Knowledge. https://www.datacenterknowledge.com/data-center-site-selection/how-important-is-location-when-choosing-a-data-center-
    3. Data Center Location Strategy: The Key Considerations. TierPoint. https://www.tierpoint.com/blog/data-center-location-strategy/
    4. 5 Considerations for Choosing Data Center Locations. Equinix Blog. https://blog.equinix.com/blog/2024/08/06/5-considerations-for-choosing-data-center-locations/
    5. AI Data Centers: Which Factors Determine Their Location? American Action Forum. https://www.americanactionforum.org/insight/ai-data-centers-which-factors-determine-their-location/
  • Efficiency is the New Grid Resilience

    Efficiency is the New Grid Resilience

    Powering Through the Perfect Storm

    The electric grid, the very backbone of our modern lives, is facing unprecedented challenges. We rely on a complex network of power lines and substations that were built for a different era, with different demands. Today, as new economic realities and technological shifts take hold, that aging infrastructure is straining under the weight of a perfect storm of factors. The good news is that we don’t have to wait for the storm to break. By embracing smart, targeted energy efficiency solutions, we can strengthen grid resilience and secure a more resilient energy future.

    The Unintended Consequences of Fiscal Policy on the Grid

    The recent passage of the federal budget has significant, if unintended, consequences for the power sector. As Eran Inbar highlights in his article for T&D World, much of the public discussion has focused on its impacts on renewable energy. However, the bill also directly targets funding for essential transmission upgrades. The budget claws back unspent funding from the Infrastructure Facilitation Program and defunds the $3 billion Electric Transmission Facilitation Program, a Department of Energy (DOE) financing initiative designed to accelerate new transmission construction. These moves, along with the redirection of hundreds of millions in EPA and DOE grants, increase the burden on utilities and, in turn, their ratepayers.

    These changes are particularly problematic given existing grid needs. Forecasts show that transmission development needs to triple just to meet current demand. With this new law, energy investment is projected to drop by as much as half a trillion dollars by 2035. This change could also increase wholesale costs by 74% and decrease overall grid reliability. The impact on renewable projects is also significant, as the bill phases out investment and production tax credits. This puts immense pressure on developers to complete projects within a compressed 2.5-year deadline created by the new policy.

    The strain on the grid is further compounded by the rapidly growing demand from emerging technologies. The rise of AI and the proliferation of massive data centers are creating an exponential increase in energy consumption. These facilities require vast, consistent power supplies to operate, placing an additional tax on an already stressed system. We are at a crossroads. Either we undertake a multi-trillion-dollar overhaul of the entire electrical infrastructure, a costly, time-consuming, and politically fraught endeavor, or we find more innovative, more immediate ways to reduce the demand and enhance grid resilience.

    Efficiency: The Key to a More Resilient Future

    The path forward lies in energy efficiency. Rather than focusing solely on increasing supply, we must focus on reducing demand. This approach is not just a temporary fix; it’s a foundational principle for building a more resilient energy ecosystem. By optimizing the equipment we already have, we can significantly reduce the load on the grid without massive capital investment or years of construction.

    This is where Coat Zone comes in. We believe that empowering businesses to achieve energy efficiency is the fastest, most effective way to bolster energy security. Our proprietary coatings offer a low-cost, high-impact solution that can be applied to your existing HVAC equipment, helping you run more efficiently with an extended lifespan and build grid resilience.

    Coat Zone’s Dual Approach to Efficiency

    Coat Zone’s products, CoilSafe®, CoilSafe Plus®, and ThermalBlock™, work together to optimize your HVAC systems. CoilSafe® and CoilSafe Plus® are liquid, glass-like coatings applied to internal evaporator and condenser coils. They are 40 times thinner than traditional coatings, allowing them to restore coil performance and improve heat exchange without impeding airflow. They prevent corrosion and dirt buildup, helping coils maintain near-original efficiency for years.

    The second part is ThermalBlock™, a thermal radiant barrier applied to the exterior cabinets of rooftop HVAC units. This coating blocks up to 93% of solar heat. It significantly reducing the unit’s operating temperature to within a few degrees of the ambient air. By lowering the thermal load, ThermalBlock™ helps your system run less, reducing run time and energy consumption.

    This dual approach provides a powerful combination of benefits:

    • Reduced Energy Consumption: Our solutions reduce overall cooling energy consumption by 15-30%.
    • Lower Costs & Rapid ROI: A single application of our coatings is a fraction of the cost of a complete system overhaul, with a typical return on investment in just 12-36 months.
    • Extended Equipment Lifespan: By preventing corrosion and reducing heat loads, our coatings can help extend the useful life of a unit by 50% or more, deferring costly replacement cycles.

    As the US federal budget shifts and new pressures from AI and data centers continue to mount, the need for a pragmatic, cost-effective solution to improving grid resilience has never been more urgent. Instead of waiting for a grid-wide disaster, businesses can take action today. By choosing to optimize existing equipment, you not only improve your bottom line but also play a critical role in strengthening the very foundation of our energy future.

    Contact Us

    Citations

    Eran Inbar. “One Big Beautiful Unintended Consequence: OBBB’s Impact on Grid Operations.” TD World, 19 August 2025, https://www.tdworld.com/policy/blog/55310527/one-big-beautiful-unintended-consequence-obbbs-impact-on-grid-operations.

    McKenna Peplinski and Nicholas Roy. “If/Then: Unintended Effects of Recent Federal Actions on Electricity Prices.” Resources for the Future, 7 August 2025, https://www.resources.org/common-resources/if-then-unintended-effects-of-recent-federal-actions-on-electricity-prices/.

  • Charting a Sustainable Path

    Charting a Sustainable Path

    The Energy Footprint of AI and Our Role in It

    In “AI in Building Design and Automation: Hype vs. Reality,” author Nathan Kegel delivers a truly insightful perspective. His article provides a balanced look at artificial intelligence. He carefully separates hype from reality. More importantly, he challenges us to consider technology’s full energy impact and AI’s significant resource costs. In reading Kegel’s article, we find another opportunity to discuss how we all can come together to create a sustainable path forward with AI.

    This forward-thinking piece forces us to confront a critical issue. We must build a sustainable path forward. The world can use AI, but we must do so responsibly. We cannot simply ignore its environmental cost. Instead, we can highlight its current drawbacks. We must work towards a viable solution. The benefits of AI in medicine and science are undeniable. Therefore, we should not bash AI. We should instead make its infrastructure more sustainable.

    The Massive Energy Demand of AI

    The article cites shocking numbers. AI is extremely power-hungry. It requires a vast amount of energy. The energy consumed to train GPT-4o was a staggering 65,000 MWh. This is enough electricity to power over 1.2 million U.S. homes for one hour. Conversely, it is enough to power roughly 1,400 homes for a full year. In fact, AI’s current power consumption is roughly the same as that of the entire country of Japan. This is a truly unsustainable pace. The resource demands, from energy to water, are immense. Thus, we must make the supporting infrastructure far more efficient to achieve a sustainable path forward.

    Our Role in Offsetting AI’s Energy

    The physical backbone of AI is the data center. These facilities require immense power. They also generate an enormous amount of heat. This heat requires even more energy to dissipate. A significant portion of a data center’s energy bill comes from cooling. We must focus our efforts here. Data centers can become more energy-efficient. We need to reduce the heat load experienced by their cooling systems. This will directly offset the enormous energy required by AI. It is a practical and necessary step. Coat Zone offers solutions for this very purpose.

    Coat Zone: Your Solution for a Sustainable Path

    Our coatings reduce the strain on HVAC systems. They improve energy efficiency and reduce heat loads. CoilSafe and CoilSafe Plus coat evaporator and condenser coils. They create an ultra-thin, glass-like inorganic barrier. This special coating restores lost efficiency. It improves heat transfer and airflow. This leads to reduced energy consumption and lower utility bills. Furthermore, ThermalBlock shields exterior surfaces from solar heat gain. This special coating reflects up to 93% of solar heat. It dramatically lowers the exterior temperature of the unit. This action lowers the heat load on the AC unit. Consequently, it reduces unit run time and lowers energy consumption.

    Building a Hybrid, Sustainable Path Towards The Future

    We must implement these smart solutions. We can move forward with AI. However, we must do so sustainably. We can embrace these powerful new technologies. We also need to build a better infrastructure. Here at Coat Zone, we are helping to provide a clear path forward for engineers. We can use innovative coatings to make existing and new buildings more energy-efficient. Additionally, we can build a sustainable future while augmenting human ingenuity. We can use smarter tools. Together, we can find a balance between technological progress and environmental responsibility.