– All of our results, In One Place
Our products have been thoroughly and independently tested to ensure performance and quality
CoilSafe®, CoilSafe® Plus™, and ThermalBlock™ (or ThermalBlock by Coat Zone®) have been rigorously tested to prove their effectiveness. From efficiency to corrosion to IAQ, our coatings have been shown to be safe while meeting or exceeding expectations.
CoilSafe® Testing
ASTM G50 Atmospheric Corrosion Test
25,000 Hrs. Completed
This testing method is a validated approach for evaluating material performance under natural environmental conditions.
ASTM G31 Field Corrosion Exposure Report
26,200 Hrs. Completed
ASTM G31 is a key standard guide for conducting laboratory immersion corrosion tests on metals, providing procedures for specimen preparation, apparatus setup, test conditions, and data analysis, helping engineers design reliable tests to predict material degradation by immersion in corrosive liquids, and it emphasizes recording all data for accurate corrosion rate calculation
ASTM B117 Salt Fog Test
6,000 Hrs. Completed
This test replicates conditions in which metal is exposed to sea air and determines corrosion resistance in a coastal environment.
ASTM G85 Acidified Sea Water Test
4,000 Hrs. Completed
This test uses a seawater solution with added acid and submerges the coated metal in it to assess corrosion resistance in a harsher environment. More aggressive test than B117.
ASTM G21 Fungal Growth Test
Zero Growth or Colonization
This test places a measured amount of fungal growth on the coated sample for a specified period to determine whether the coated surface supports fungal growth. Our sample had zero growth.
RoHS 2: Recasting 2002/95/EC
Heavy Metal/Toxicity Test
Passed for CoilSafe®, per European lab testing standards for building materials.
CoilSafe® Plus™ Testing
ISO 22196 Bacterial Growth Test
99.5% Reduction in Bacteria
This test used a measured number of designated bacteria and measured the kill rate over a 24-hour period.
ISO 21702:2019 Viral Growth Test
99.8% Reduction in SARS-CoV-2
This test used a measured number of SARS-CoV-2 virus and measured the kill rate over a 24-hour period.
UVC Light Ray Exposure
900 Hrs. Passed With No Change
CoilSafe® Plus™ was exposed to UVC, and pencil harness and adhesion were tested every 200 Hours, with no change in the performance noted.
ANSI/UL 723 Flame & Smoke Spread
Flame Rating of 0, Smoke Rating of 0
This test used CoilSafe® Plus™ applied to a cement board and then subjected to a metered flame at a specified temperature and duration. With a flame rating of 0 and a smoke rating of 0, CoilSafe® Plus™ is a tier 1 material and highly resistant to flame or heat.
ThermalBlock™ (or ThermalBlock by Coat Zone®) Testing
Cool Roof Rating Council
Rated Product
The CRRC is a 501(c)(3) nonprofit organization that develops fair, accurate, and credible methods for evaluating and labeling the radiative properties of
roofing and exterior wall products
ASTM C1549 Reflectivity Testing
Rating of .89 Achieved
This test places a sample in a light chamber and measures the percentage of visible light that is reflected off the surface. ThermalBlock™ (or ThermalBlock by Coat Zone®) reflects 89% of visible light.
ASTM C1371 Emissivity Testing
Rating of .87 Achieved
This test places a sample in a chamber and measures its resistance to heat gain from heat sources, such as air temperature and IR heat gain. ThermalBlock™ (or ThermalBlock by Coat Zone®) rejects 87% of heat gain from external sources.
ANSI/UL 723 Flame and Smoke Spread
Flame Rating of 5, Smoke Rating of 20
This test used ThermalBlock™ (or ThermalBlock by Coat Zone®) applied to a cement board and then subjected to a metered flame at a specified temperature and duration. With a flame rating of 5 and a smoke rating of 20, ThermalBlock™ (or ThermalBlock by Coat Zone®) is a tier 1 material and highly resistant to flame or heat.
ASTM D3363 Pencil Hardness Test
Rating of 4B
This test is conducted on a coated sample by using specific pencils with varying lead hardness, and the pencil is drawn across the surface to determine at what point it will scratch the surface. 4B is a mid-range hardness and demonstrates resistance to medium traffic and abrasion.
ASTM D3359 Adhesion Testing
Rating of 5A/5B
This test is conducted on a sample to determine how well it adheres to the surface and to determine the durability of the bond to the surface. 5A/5B are best-in-class ratings and are two tests conducted with an X cut on the surface and a cross-hatch cut on the surface. With these results, we have an extremely good bond and long life of ThermalBlock™ (or ThermalBlock by Coat Zone®) bonded to a surface.
K-Value/
R-Value/U-Value
K-Value: 0.1775 W/mK
R-Value: 0.0485 m2K/W
U-Value: 21.37 W/m2K
The thermal conductivity (K-value) of the cement board is 0.2048 W/mK, which improves to 0.1775 W/mK with ThermalBlock™ (or ThermalBlock by Coat Zone®). Correspondingly, the thermal resistance (R-Value) increases from 0.0405 m2K/W to 0.0485 m2K/W, indicating enhanced insulation. As a result, the thermal transmittance (U-Value) decreases from 24.69 W/m2K for the uncoated board to 21.37 W/m2K with the coating, demonstrating improved energy efficiency.
ASTM D882 Elongation test
Rating of 30% Expansion/Contraction
This test was conducted by UL Labs to determine the overall strength and the expansion and contraction abilities of the product. The results are excellent and show that ThermalBlock™ (or ThermalBlock by Coat Zone®) is a very durable product that will stand up over time.
NFRC 201-2017 SHGC Test
93% Reduction of Heat Transfer
Performed by Intertek Solar Labs. Test showed an 83.63 w/m², 93% reduction of heat transfer through the coated surface and a SHGC improvement from .09 uncoated versus .01 for a coated surface.
ASTM D882 Tensile strength
Rating of 5,374 psi
This test is conducted by using a prescribed thickness of ThermalBlock™ (or ThermalBlock by Coat Zone®) and applying a stretching pressure until the break point of the ThermalBlock™.
Solar Reflective Index
Low Wind: 108.0
Medium Wind: 108.24
High Wind: 108.46
Achieved an SRI of 108 across varying wind conditions, indicating excellent solar reflectivity and heat resistance properties.
Thermal Conductivity Test
K- Value: 13% Reduction
R-Value: 20% Increase
Test was conducted per ASTM C518-21, the coating reduced thermal conductivity by approximately 13%(K-Value) and increased thermal resistance by around 20%(R-Value) when applied to cement boards.
Volatile Organic Compounds (VOC) Test
12 Grams Per Liter
ThermalBlock™ (or ThermalBlock by Coat Zone®) has a very low VOC level, aligning well with eco-friendly and indoor air quality standards, enhancing its appeal for residential and commercial markets.
ASTM C1549 Reflectivity Testing – 3 Year
Rating of .80 Achieved
This test places a 3-year-old sample in a light chamber and measures the percentage of visible light that is reflected off the surface. ThermalBlock™ (or ThermalBlock by Coat Zone®) reflects 80% of visible light.
ASTM C1371 Emissivity Testing – 3 Year
Rating of .87 Achieved
This test places a 3-year-old sample in a chamber and measures its resistance to heat gain from heat sources of air temperature and IR heat gain. ThermalBlock™ (or ThermalBlock by Coat Zone®) rejects 87% of heat gain from external sources.
Formaldehyde Test
<10ppm
Measured formaldehyde levels were below 10ppm, confirming the coating’s safety for indoor air quality.
Questions about our testing?
We are here to help. Let’s have a conversation.